The roof on your home is a valuable asset – it endures daily damage from hail, rain, and the sun and requires regular maintenance. The natural aging process of a roof can sometimes result in damage that requires immediate attention, so it maintains its structural integrity.
However, how do you tell whether the damage is severe and when to call in professional roofing contractors? You will get the answer to what, why, and how of tile roof replacement at the end of this article!
The lifespan of roof tiles can range to nearly a century, which is around 50 years. Nevertheless, your environment can play an important role in how long your roof tiles are going to last. Factors such as natural disasters, pests, and daily occurrences such as sun exposure are environmental factors, as well as natural disasters, such as storms that leave debris.
The ventilation and insulation of your home can impact the health of your roof tiles. Moreover, the characteristics of the roof, including its installation and slope, can affect its performance.
The roofing materials used to construct it must also be durable and affordable. Slate tiles are usually durable and cost-effective, while concrete tiles are susceptible to saltwater erosion and clay tiles by freezing and might require a roof replacement in winter.
Listed below are some key signs that you need your tile roof replaced immediately by a roofing company!
It is common for roof tiles to crack or fall off in areas that experience frequent storms or heavy rains. It is usually the repair or replacement of cracked or missing tiles that is possible at very reasonable rates and conveniently. On the other hand, the same thing could be an indication that your roof tiles are too old.
This shows that disregarding cracked tiles leads to further damage, resulting in higher repair and replacement costs. Thus, talking to a roof replacement contractor and calling them in for a home inspection is a good idea.
The surface of tiles can erode over time, and the most common cause is acid damage from excessive bird droppings or pollution. It is possible to minimize surface erosion with sealants on tiles and with proper roof maintenance, but once it has set in it cannot be reversed. Water seeps into the tiles when the surface sealant erodes, resulting in leaks and other damages.
Due to moisture, it is common to find moss or algae growing on or between older roof tiles. Despite these efforts, removing and chemically treating the moss can often lead to erosion, allowing water to infiltrate the area.
The growth of mold and algae between tiles usually indicates damp conditions below. It’s important to have the roof checked by a roof inspector if any of these conditions exist.
Although it’s easy to assume that tiles make up your entire roof, they’re not the only component. It would be wise to check other roof fixtures as well, such as gutters, flashings, fascia boards, and whatever else may be on the roof, such as vents, solar panels, or whirlybirds.
The majority of them are made to last for many years, so you must be careful if your roof is getting older and inspect your roof frequently. The damage from these will cause you to have flooding, dirt, and vermin infestations in your home soon. Thus, seek inspection services if you see any visible signs of fixture roof damage.
Regular maintenance is important when it comes to caring for your roof. A roof that has peeling paintwork on either its inside or outside exterior may not perform well.
In addition to looking unsightly, flaking or damaged paintwork can also make your roof less effective at protecting your home from the elements. As a result, roof repairs may be costly or even require new roofs.
Your roof’s paintwork must remain in top condition not only to improve its protection but also for the sake of adding value to it and ultimately extending its lifespan.
Despite their strength, even the toughest roofs can’t last forever. It is a good idea to keep track of the number of years since your roof was first installed and then work out when it might be time to do a general roof inspection on an aged roof.
The weight of the water can cause your roof to sag if your roof experiences extreme weather conditions, as the boards can buckle and break under the weight of water. In turn, this can create a rather unsafe, dangerous structure in the interior of your home, meaning you need to replace the roof immediately.
Depending on the complexity of the roof, roof replacement may take as little as one day or as long as three weeks. It usually takes two to three days for a single-family home to install a new roof. Several factors influence how long it takes to replace a roofing system. Among them are:
For tile roof replacements, the turnaround time is usually between 6 and 9 days. Due to the weight of the tiles and installation requirements for aligning them all, tile takes longer to install. Roofing services install tiles in a pattern and must moisture-proof each tile to protect the roof and the home, adding to the time required.
The key to a strong home is a roof that can withstand the test of time. That’s why it’s so important to monitor the health of your tiles.
If you neglect your roof, damage may spread to other parts of your home, which may ask for residential roof replacement and can be costly if not addressed. Expert roofing professionals can help you save time and money, helping to protect the investment you have made. Contact SR1 Roofing today.
Trevor is an ex-firefighter / paramedic for the city of Keller for eight years and also has a 10- year background in the construction and restoration industry.
For a FREE estimate or inspection of your residential roof, call us today.
Contact UsContact us at the TheRoof WP office nearest to you or submit a business inquiry online.
Contact Us